Flash point

Flash Point - CFP 01

FLASH POINT(1000x1000)

Flash point is the lowest temperature at which substance vapors mix with air and become flammable in the open air. This method is done according to ASTM D92 standard by using a small flame in the vicinity of the test cell to ignite the vapors.

Technical Characteristics
  • Adjustable heater power from 0 to 100 percent
  • Equipped with a fan to accelerate the cooling of the heater at the end of the test
  • Digital display with ±0.1 accuracy (Instrument sensitivity ±0.1)
Ignition point

The ignition point is the temperature at which the vapors continue to burn for at least 5 seconds after being ignited. Accordingly, measuring the flash point and ignition point requires an ignited source.

Model

  • Flash Point-CFP 01

Temp. Range

  • Ambient to 400 c

Temp. Controlle

  • PID Control

Accuracy

  • ± 0.1

Dimensions (mm)

  • 150 / 330 / 250

Weight (kg)

  • 5 kg

Power Source

  • 220V – 50Hz – 2A

Setting/Readout

  • Digital & Remote Controller

Heater

  • 500 W

Detector

  • Automatic

Test Method

  • ASTM D 92

Flash Point – CFP 01

The CFP 01 instrument is designed in a way to determine the flash point and ignition point of petroleum products and derivatives by adjusting the heating speed of the sample digitally and having an automatic system for passing the flame over the sample both manually and also with the remote controller. This in addition to being accurate in showing the flash point, provides proper safety for the operator. The parts are made of chemical material and physical characteristics resistant to ensure longevity.

Features
  • Test cell according to ASTM D92 standard
  • Adjustable heating system
  • Instrument’s parts are made of chemical material and physical characteristics resistant
  • Includes a reference thermometer
  • With PT100 temperature sensors to measure sample and heater temperatures
  • Digital display with ±0.1 accuracy (Instrument sensitivity ±0.1)
  • Equipped with a fan to accelerate the cooling of the heater at the end of the test
  • With an automatic system for passing the flame over the sample both manually and with the remote controller
  • Allows the adjustment of the speed at which the flame passes over the sample